|
Model | Description
| |
LVR Series
|
- Large Vertical Ram, with 100-ton cylinder and
sliding table
- 28" maximum vertical
clearance, with 24" diameter plate 300 lbs. capacity on sliding table.
- Available
up to 10,000 PSI hydrostatic test, depending on size of valves tested.
- Perform
upstream and downstream seat, and shell tests.
- Built-in
stainless steel water tank, air-operated pumps
- Panel
mounted test gauges, push-button controls
- 84"
L x36" W x92" H, 3000 lbs.
Technical Specifications |
|
DVR Series Dual Station
|
- Dual-Station vertical clamping fixture
with 30-ton cylinders, maximum clearance of 16"
- Hydrostatic
testing up to 1200 PSI with Upstream, Downstream and Shell test capacities
- 100 PSI Air test with bubble jar for seat
testing.
- Capable of testing 1/2"
to 4" flanged and socket weld valves with adapter seal plates.
- Panel-mounted
6" dial test gauges, pump regulators and control valves.
- Push-button
controls and digital timer with audio-visual alarm
- 64"
L x 24" W x 60" H powder coated cabinet with SS tank
- Total
weight: 2000 lbs.
| | DS
Series: Dual Station
|
- Tilting Fixture with a 300-ton hydraulic clamping
cylinder. Maximum opening of 42" with a 36" wide clearance. Available
in various clamping cylinders and lengths.
- Hydrostatic
test pressures up to 5,000 PSI depending on sizes of valves tested, can perform
upstream, downstream and shell tests.
- Control
console with panel mounted gauges , push button controls
- Fixture:
108" L x 72" W x46" H approx. wt. 3500 lbs. Console: 72"
L x 36" W x 54" H, powder coated, 1200 lbs.
Technical Specifications |
|
SLF Series
| - Self-contained
large fixtures similar to Series S
- Available
from 12" to 32" diameter test plates with polyurethane seals
- Hydrostatic
tests up to 500 PSI, 100 PSI air
- Built-in
water re-circ system with filters & tank.
- Panel
mounted 6" dial test gauge, regulators, valves.
- Safety
Lexan shields and Safety Hydraulic Interlocks.
|
| SVR Series
|
- 100-Ton hydraulic clamping fixture, adjustable
clamping force
- Tests flanged valves
from 1/2 to 12" Class 300
- Adapters
for threaded and socket weld valves.
- Shell
test, Upstream and Downstream seat testing without un-clamping valve from fixture.
- Push-button controls for pumps and
valve actuation.
- Built-in stainless
steel reservoir
- Built-in Lexan®
shield all-around
- Dual palm button
clamp actuator
- 24" wide x 20"
fixture clearance 15" diameter seal plate, o-rings
- 72"
L x 32" W x 84" H
- Approximate
weight: 2500 lbs.
Technical Specifications |
|
TF Series: Tilting Fixture
| - Tilting
Fixture with a 300-ton hydraulic clamping cylinder. Maximum opening of 42"
with a 36" wide clearance. Available in various clamping cylinders and lengths.
- Hydrostatic test pressures up to
5,000 PSI depending on sizes of valves tested, can perform upstream, downstream
and shell tests.
- Control console
with panel mounted gauges , push button controls
- Fixture:
108" L x 72" W x46" H approx. wt. 3500 lbs.
- Console:
72" L x 36" W x 54" H, powder coated, 1200 lbs.
|
TF-100T
Series:  | •
TILTING FIXTURE: Valves can be loaded in the horizontal
position, clamped in place, tilted to the vertical position or filling, venting
& testing.
• SAFETY INTERLOCK: Hydraulic Safety Interlock feature
prevents accidental release of clamping pressure unless the test pressure is vented.
•
INCREASE TESTING EFFICIENCY: Both up-stream and down-stream seat tests, as well
as body shell tests can be performed without having to remove the valve in place.
An air flush connection on the top plate allows the test media to be flushed back
to the storage tank.
|
|
STF SERIES
| - Dual
clamping fixture
- Capable of clamping
flanged valves from 2” to 12” Class 300
- Capable
of testing smaller valves and meters up to 6,000 PSI hydrostatic pressure
- Low
Pressure 100 PSI air tests included with bubble jar for leak rate testing
- Data
Acquisition Console complete with PC, monitor, printer, software and hardware
optional
- Dimensions: Test Stand: 96”
L x 48” W x 108” H , Data Console: 60” L x 24” W x68” H
- Shipping
weight: approximately 3,000 lbs. crated
Technical Specifications |
|
)
)
)
)
)
)
)
)
)
)
)
)
