Series RTS

• Used to test low pressure gas regulators with air up to 100 PSI under water.
• Test stand can test threaded and flanged regulators up to 2", both horizontal and vertical mount
• Low pressure test and flows up to 6000 SCFH.
• Fixture can tilt and lower regulator into SS tank
• 48" W X 48" L X36" H tank, console with 30 gal. tank.

Series AFM

• Used to test high pressure axial and radial flow regulators up to 3,000 PSI with air or nitrogen.
• 100-ton hydraulic clamping fixture to seal meter and submerge entire fixture underwater inside test chamber.
• Safety Lexan shields and Interlocks provided.
• Can test up to 8" flanged meter 3000 PSI
• Chamber : 36" W x36" D x 96" H with hydraulic fixture
• Control console: 36" W x 36" L x 56" H powder coated.
• Approximate total weight: 3500 lbs.

Series MMI

• Multi-station hydrostatic test stand to test high pressure meters with water up to 10,000 PSI
• Dual vertical test fixture up to 2" meters.
• Tilting fixture with 100-ton ram up to 6" meters.
• Independent stations to test each meter at different test pressures, automation with PC also.
• Console: 96" L x 36" W x 98" H, Fixture: 60" W x 96" L x 48" H
• Total Wt. 3800 lbs.

Series ATL

• Air underwater test stand to test up to 12" flanged valves underwater up to 350 PSI
• 50-ton hydraulic cylinder for clamping valves
• Pneumatic cylinders for lowering into tank
• Control console with filtration pumps included.
• Tank: 72" L x 48" W x 36" H acrylic. Console: 36" W x 24" D x 54" H
• Total wt. 2500 lbs.

Series TCA Pressure Vessels

• Custom-built Pressure Vessels from 6’ to 48" diameter up to 300 feet long, with pressures up to 3,000 PSI
• Computer-controlled console can be programmed for various test cycle profiles using LabView® software and hardware.
• Manual testing with panel mounted pressure regulator, 6" dial test gauge, test timer and pressure chart recorder.
• High pressure water accumulators for high flows and separate water storage tank with filtration and re-circulating pump.
• Pressure Vessels are ASME certified and have safety interlocks.
• Various feed-through configurations available
• Vessel: 48" ID x 72" L with clam shell door. Approximate weight: 20,000 lbs.
• Console: 72" L x 36" x 54" H powder coated with computer, monitor, and printer. Approximate weight; 1200 lbs.