HCF Series

• 50-ton hydraulic cylinder with Acme screw
• Cone shaped seal heads test up to 12" flanged check valves
• Automated computer controlled testing or manual test available.
• Built-in water reservoir with filtration system
• Panel mounted test gauges, valves and push button controls
• Fixture: 89" L x39" W
• Console: 48" L x 24" W
• Total Wt. 3200 lbs.

HVR Series

• 300-TON Hydraulic Clamping Cylinder capable of testing up to 36" valves.
• Dual station test fixture allows valves to be set up in one while testing another.
• Various test seal plates for flanged and grooved end valves.
• Clamping fixture moves front and back and is able to test on either seal plate.
• Available in single or dual clamping fixtures with a single test console.
• Fixture: 72" W x 120" L x 120" H. Console: 96" L x 42" W x 60" H

Series HVT: Trailer Mounted

• 300-ton hydraulic clamping fixture with a 48" diameter test plate capable of testing up to a 36" flanged valve.
• Air-operated valves, and pumps with built-in gas-driven air compressor for use in remote areas.
• 50-gallon water storage tank with re-circ and filtration system.
• Hydrostatic testing up to 500 PSI, air tests up to 100 PSI
• Trailer: 14 ft. long x 6 ft. wide, dual axle, street legal, 10,300 lbs.

Series LHF - 1000 Ton Fixture

• 1000-ton hydraulic clamping fixture with a 36" diameter test plate 68" maximum opening, can test from 12" 150 lb. ball valves up to 30" Class 600 lb. ball valves, flanged.
• Control console, 5000 PSI hydro system, seat & shell tests
• 300 gallon recirc system with 50 GPM pump & filter system.
• 6 ft wide x 12 feet long, total wt. (fixture) 25,000 lbs.

LVR-DS

• Identical to the standard LVR Series but with dual clamping fixtures.
• Dual 100-ton hydraulic cylinders air-actuated sliding tables.
• Can test valves to 12" Class 300
• Built-in stainless steel water reservoir, panel mounted 6" dial gauges, regulators and push-button controls.
• Independent hydraulic clamping fixtures and hydrostatic test systems allows simultaneous testing of different valves.
• Ability to test flanged, and grooved end valves.
• 120" L x 48" W x 120" H approx. 4000 lbs.