Home Contact About Products Support

Mobile, Air-Driven Hydrostatic

Test Power Units

Model Description

Series P 300 SM
  • Air driven lubricated piston pump available on ranges of: 0-1000, 1850, 3000, 4500, 6000, 8800, 10,000, 15,000, 20,000 and 30,000 PSI (with 100 PSI driving air)
  • Panel mounted 4" dial gauges, pump regulator, and valves
  • Bulkhead ports at rear for air, water, drain and test ports
  • Filter, regulator, pump lubricator, air shut-off valves included
  • Powder coated heavy-duty tubular frame with wheels for mobility
  • 15" L x 15" W x 36" H
  • Total Weight: 75 lbs.
  • Technical Specifications


Series P 300 VR
  • Air-driven piston pump, lubricated, available in the following pressure ranges: 0-1000, 0-1850, 0-3000, 0-4500, 0-6000, 0-8800 and 0-10,000 PSI.
  • 5 gallon stainless steel reservoir with tank vent/fill cap, sight gauge and drain valve.
  • Panel mounted 4" dial gauges, regulator and shut off valves
  • Filter, regulator, pump lubricator 3/8" NPT
  • Bulkhead ports at the rear for air inlet and test port
  • Heavy-duty powder coated tubular frame with wheels, 15" L x 15" W x 36" H. Total Wt. 90 lbs.
  • Technical Specifications


Series P 300 PR
  • Air-driven piston pump with pressure ranges from 0-1000, 1850, 3000, 4500, 8800 and 10,000 PSI
  • 8" circular chart pressure recorder, battery operated with adjustable speeds of 96 min. 24 hrs. 7 and 30 days.
  • Panel mounted 4" dial gauges, regulator and valves
  • Filter, regulator, lubricator 3/8" NPT included.
  • Air inlet, water inlet, drain and test port at rear bulkhead.
  • 15" L x 15" W x 36" H
  • Total Weight: 87 lbs.
  • Technical Specifications

 


Series P 300 VP DR
  • Dual Pump design, high-low system with a low pressure double diaphragm pump, 0-100 PSI, 5 GPM, and a 0-10,000 PSI high pressure pump.
  • 20-gallon stainless steel reservoir with vent -fill cap, sight gauge & drain
  • Panel mounted 6" dial gauge all stainless steel, glycerin filled
  • Panel mounted high pressure ball valves, 10,000 PSI 3/8" orifice.
  • Closed loop test system with air flush recovery to tank, vent sight flow indicator and drain valve.
  • Panel mounted pump regulators and shut off valves.
  • 1" tubular frame, powder coated with swivel casters and brakes.
  • Auxiliary gauge port quick disconnect
  • 24" W x 15L x 36" H
  • Approximate shipping weight: 150 lbs. (dry weight.)
  • Technical Specifications


Series PS 300
  • Non-lubricated piston pump available in ranges from 0-500, 1000, 2000, 3000, 4000, 6000 and 10,000 PSI
  • Available in single ended version (shown in picture) or double-ended version for greater flows.
  • Panel-mounted 4" dial gauges, regulator, and valves.
  • Filter, regulator 3/8" NPT
  • Air , water inlet, drain and test ports located at the rear bulkhead.
  • Heavy-duty powder coated frame 15" L x15" W x36" H
  • Total Weight: 72 lbs. (single)
  • Technical Specifications


Series PS300 VR
  • Non-lubricated piston pump available in pressures from 0-500, 1000, 2000, 3000 & 6000 PSI
  • 5-gallon stainless steel tank with fill/vent port, sight gauge and drain valve
  • Available in single or double ended, or dual pumps for high-low testing (shown in photo)
  • Panel-mounted 4" dial gauges, pressure regulator, and valves
  • Heavy-duty powder coated frame with wheels, 15" L x 15" W x36" H
  • Total weight: (single) 85 lbs.
  • Technical Specifications


Series P 300 SP
  • Special Portable tester with dual hydro pump set up with four test stations
  • Air-driven piston pump with combination of ranges from 0-500, 1000, 2000, 3000, 6000 and 10,000 PSI.
  • Individual cutout valves, drain valves and gauges with QDC’s for each test station.
  • Dual-pen circular pressure chart recorder, battery drive with 96 min. 24 hrs. 7 and 30 day rotation.
  • Sturdy tubular frame, powder coated with wheels 24" L x 15" W x 36" H
  • Total weight: 175 lbs.
 
Series P 900
  • High volume air driven piston pump, 10 gpm free flow, 5 gpm @ 2000 PSI
  • Available in 0-4500 and 0-6500 PSI ranges.
  • Panel mounted 4" dial gauges, regulators and valves
  • 1" NPT water inlet, 1/2" NPT test port discharge, 1/2" air inlet bulkhead ports located at the rear
  • Sturdy tubular frame with wheels, powder coated
  • 15" L x 15" W x 42" H frame available in black, red, blue , safety yellow and other colors
  • Total Weight: 135 lbs.
  •   Technical Specifications


751 Design Court, Suite B
Chula Vista, CA 91911
VOICE: 619/585-8484
Fax 619/585-9996

1-800-258-7848