|
Model
|
Description
|
Series P 200 |
- Air-driven, lubricated piston pump
available from 0-1000 to 0-30,000 PSI ranges.
- 4" dial gauge, liquid filled with
QDC (up to 10 K PSI), manifold block and drain valve
stainless steel.
- Filter, regulator, lubricator and
shut off valve, 3/8" NPT
- Extra QDC port for relief valve
(see accessories)
- Heavy-duty powder coated frame
available in red, blue, safety yellow and others.
- 15" L x 15" W x 15" H
- Total Wt. 60 lbs.
Technical Specifications
|
Series P 200 SS |
- Same design as the standard P200
but all stainless steel construction, suitable for Off
Shore use.
- Epoxy-coated pump, air-driven
pressure ranges from 0-1000 up to 0-10,000 with stainless
steel quick disconnects, up to 30,000 PSI without gauge
quick disconnects
- All stainless steel valves, tubing
and fittings.
- 4" dial gauges all stainless,
glycerin filled, 0.5% accuracy
- 3/8" NPT water, air and test port
connections
- 1" square tubular frame, 15" L x
15" W x 15" H polished SS
- Total weight: 62 lbs.
Technical Specifications
|
Series P 200 RC |
- Remote control operation of
hydrostatic pump by controlling the air supply, water
supply and drain valve.
- Air-driven piston pump available in
pressures up to 30,000 PSI.
- 20 foot long power cable with
pendent control to allow operator to perform testing at a
safe distance.
- Can be used as a pressure source
for tube forming, swaging and other applications.
- 20" L x 15" W x 15" H, 85 lbs.
Technical Specifications
|
Series P 200 VR |
- Air-driven piston pump with 1.5
gallon stainless steel tank.
- Available in pressure ranges from
0-1000 PSI to 0-30,000 PSI
- 4" dial gauges with quick
disconnects (up to 10,000 PSI) liquid filled all stainless
steel gauges 0.5% accuracy, full scale.
- Air shut-off valve,
filter-regulator and pump lubricator included.
- High pressure drain valve return
port back to the tank.
- All stainless steel tank, valves
and pump.
- Heavy duty powder coated frame 20"
L x 15" W x 15" H
- Total weight (dry) 49 lbs
Technical Specifications
|
Series P 400 |
- Air-driven, non-lubricated piston
pump available from 0-500 to 10,000 PSI ranges.
- Heavy duty powder coated tubular
frame with built-in 3 gallon stainless steel tank, with
vent/fill cap and sight gauge
- 4" dial stainless steel gauge,
liquid filled, manifold block, and drain valve
- Filter-Regulator with gauge, and
shut off valve, 1/4" NPT
- 15" L x 15" W x 15" L
- Total Wt. (dry) 68 lbs.
|
Series PS 200 |
- Non-lubricated piston pump
available in pressures from 0-500 PSI up to 0-10,000 PSI
- 4" dial all stainless steel gauge,
liquid filled, 0.5% accuracy.
- 3/8" NPT Filter-Regulator with
gauge
- Stainless steel drain valve
- 1/4" NPT mainfold outlet port
- 15" L X 15" W H tubular frame,
power coated.
- Total weight: 36lbs
|
Series P 500 LP |
- Low pressure combination high-low
pump
- 0-100 PSI double-diaphragm pump 14
gpm and 0-500 PSI to
- 0-6,000 PSI piston pump
- Manifold block, 4" dial gauge and
drain valve included
- Filter-Regulator, lubricator, air
shut off valves, 3/8" NPT
- 28" L x 15" W x 18" H
|
Series P 500 |
- Dual air-drive piston pumps for
high-low test with pressures to 10,000 PSI
- Stainless steel manifold block dual
gauge with optional relief valve(shown)
- 4" dial gauges, liquid filled with
QDC and extra relief valve port.
- Filter, regulator and pump
lubricator.
- 28" L x 15" W x18" H, wt: 80 lbs.
Technical Specifications
|
Series FHT |
- 4-Station Fire Hose tester, air
driven piston pump 3 gpm @ 500 PSI
- Individual cutout valve,2
1/2"gauge, adapter per station
- Includes 1 1/2 & 2 1/2 " hose
adapters
- Filter-regulator and shut off valve
3/8" NPT
- Extra port for high pressure washer
- 28" L x 15" W x 15"H
- Total Wt. 69 lbs
|
Series P500 CG |
- Air-driven piston pump, similar to
SM Series models, but with heavy-duty welded frame.
- Available in ranges from0-1,000 PSI
up to 0-30,000 PSI.
- 1/4" FPT discharge port on manifold
block with 4" dial all SS gauge, and ss drain valve.
- 12" x 24" base plate with 1" square
tubing frame, powder coated, total wt. 55 lbs.
|
Series P500DI |
- Air-driven piston pump with
separated pump side, compatible for use with de-ionized
water.
- Available in pressure ranges of:
0-4,500 PSI, 0-6,000 PSI and 0-10,000 PSI
- Dual gauge manifold block with
quick disconnects for gauges and extra port for relief
valves
- 3/8" Filter-Regulator and
Lubricator set up.
- 28" L x 15" W x 18" H tubular frame
powder coated, total weight is 65 lbs.
|
|
