|
HBT Series Model |
Description
|
|
Series
HBT
|
- 12
gauge stainless steel tank with 1/2" Lexan inside skin and heavy duty
10 gauge perforated stainless steel tray.
- Tubular
frame with two layers of 1/2" Lexan, Safety Interclock switch
automatically drains test pressure when opened.
- Air
driven piston pump with speed control, panel mounted pressure
regulator, pump discharge metering valve, 6" dial gauge liquid filled
with maximum pointer, available in pressure ranges up to 30,000 PSI.
- Tank:
36" L x 18" W x 12" H, overall length 54" L , approx. 300 lbs. wt.
|
|
HBT-A
Automated Tester
|
-
12-gauge stainless steel tank with 1/2" Lexan
inside skin, heavy duty 10 gauge perforated inside tray (like HBT
Model)
-
Tubular frame shield with Lexan and automatic
pressure drain.
-
Push button controls for manual testing, and test
timers for automated testing. Tester automatically fills, vents, and
pressurizes components, after pre-set hold time alarms sounds to signal
end.
-
Air driven piston pump, pressures to 10,000 PSI,
adjustable.
-
Tank dimensions: 24" L x 18" W x12" H, overall
length is 48" L.
|
|
HCT Series Model |
Description
|
|
Series HCT
|
- Capable
of cycle-testing 10 hose assemblies underwater@ 180° F at 500 PSI
(higher pressures available, consult Barbee)
- Control
panel with 6" dial test gauge, digital chart recorder, test timers, and
push button controls
- Built-in
tank heater with digital temperature controller and panel meter and
over-heat protection
- Insulated
stainless steel tank with Lexan shield and SS frame.
- Powder
coated cabinet with casters 60" L x 32" W x 54 " H
- Total
weight: 850 lbs.
|
|
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
