Ground Support Equipment & Pneumatic Test Stands
 

Model	Description
Series PNC	Heavy-duty cart with 10" pneumatic wheels, and swivel casters Capable of handling 3500 PSI Nitrogen bottles with adapters Panel-mounted high pressure regulator, 4" dial stainless steel gauges and needle valves Can be supplied with air-driven gas boosters capable of charging bottles up to 3400 PSI with 100 PSI shop air Powder coated frame 32" L x 36" W x 42" H Total weight: (less bottles) 300 lbs.
Series NCC	Trailer mounted cart with 16" pneumatic wheels and tow bar Dual air-driven gas boosters capable of pressures up to 8,000 PSI Uses four 3500 PSI Nitrogen bottles with hoses Panel mounted 6" dial gauges liquid filled, stainless steel valves and regulators. 96" L x48" W x 48" H Total weight: 1800 lbs.
Series HPU	Portable Hydraulic Power unit with air-driven piston pump, capable of pressures up to 10,000 PSI 5-gallon stainless steel reservoir, with vent/fill cap, sight gauge, and suction filter. 4" dial all stainless steel gauge, manifold block and drain valve. Filter, regulator, lubricator and shut off valve. Compatible with hydraulic fluid and skydrol (must specify) 13" L x 13" W x18" H Total weight: 65 lbs.
Series PHC	Portable Hydraulic Power unit with wheels and 5-gallon stainless steel reservoir. Dual pump set up with Low Pressure pump, 0-500 PSI and high pressure pump 0-6000 PSI, non-lubricated. Panel mounted 4" dial stainless steel gauges, pump regulator, shut off valves and drain valves. Compatible with hydraulic fluid, lubricating oil and brake fluid (must specify requirements) 15" L x 15" W x 36" H powder coated frame with wheels. Total weight: 85 lbs. (dry)
Series HTT	Hydrostatic/Pneumatic Test stand with air-operated shields used to test pre-fabricated lines and ducts for aircraft engines. Capable of test pressures up to 10,000 PSI. Test bed area: 60" W x 72" L x 48" H with stainless steel test tray. Push button controls, digital test timers, recirc system with 30 gallon tank. 78" L x 84" W x 92" H Total weight: 2200 lbs.
Series PN 6000	Pneumatic test stand with test chamber H.P. air compressor up to 5,000 PSI Control console with 6" dial gauges, regulators, and flowmeters, & digital timer. Chamber: 36" W x 36" L x 72" H with cart inside. Console: 60" L x 36" W x 66" H 7.5 CFM air compressor with 10 gal. ASME bottle Total wt. 3500 lbs.